The Saramonic SmartRig+ is a portable microphone/guitar interface for recording professional quality audio.

The SmartRig+ makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels allow you to connect and control gain on multiple microphones or guitars at the same time. The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4″ (6.35mm) guitar inputs, and two 1/8″ (3.5mm) jack inputs for connecting any instrument or microphone. Outputs to a standard 1.8″ 3.5mm cable for use with, smartphones, cameras and other devices.

Provides 48V phantom power for microphones, and includes a 3.5mm headphone output for real-time sound monitoring. The two gain control thumbwheels make it easy to set precise levels.Toggle between Mono and Stereo output modes as necessary. Powered by one 9V battery.

– Two Independent Channels
– Two XLR Microphone Inputs, Two 3.5mm (TRS) Microphone Inputs, Two 1/4″ Guitar Inputs
– Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS); 3.5mm Headphone Output Jack for Monitoring
– +48v Phantom Power Switch
– Mono/Stereo Toggle Output Switch

Specifikime

Frequency Response 20 Hz to 20 kHz, +/-0.5 dB
Distortion Less than 0.01% @ 1 kHz, -30 dBu input
Signal to Noise Ratio 80 dB @ 1 kHz, -30 dBu input
Noise -98 dB full band (with Phantom Power)
Gain +23 dBu
Maximum Output Level 2 Vrms
Phantom Power 48 V
Phantom Max Current 13 mA
Channels 2
Inputs 2 x XLR + 1/4″ (6.35mm) Combo Jack
2 x 1/8” (3.5mm) TRS
Selectable Mixer Mono or Stereo Output via Toggle Switch
Outputs 1 x Male 1/8” (3.5mm) TRRS Output Cable
1 x Female 1.8” (3.5 mm) Headphone Jack
Selectable Output TRS for Camera/Recorder or TRRS for Mobile Devices via Toggle Switch
Battery 1 x 9-volt (Alkaline or Lithium)
Dimensions 4.72″ x 1.57″ x 1.57″ (120 x 40 x 40mm)
Weight 4.6 oz (130g)

Broshure