A Cut Above The Rest

Numark Scratch is a 24-bit two-channel mixer that redefines what you can do with an affordable 2-channel scratch mixer. With Scratch, you’ll be able to create and perform at a higher level than you ever thought was possible—especially with a mixer in the affordable price category. Scratch combines professional-level performance and outright DJing fun in a way nothing else ever has. You’ve got to experience it to really see what it’s all about!

Scratch is really something special—It brings a new look and design to the mixer category. It boasts an all-metal build with professional features such as a built-in Innofader crossfader, performance pads, instant loop encoder, and toggle paddles to trigger software-based effects. To top it off, it comes with Serato DJ Pro and Scratch is Serato DVS ready.

Performance Pads

Its soft responsive performance pads give you the freedom to access cues, rolls, and sampler quickly. The pad mode makes it very convenient to set hot cue points, roll temporary loops, and trigger samples at ease.

Software FX

Six dedicated software-based FX to apply to individual channel or both using the premium performance base toggle paddles. You can adjust your FX mix from Dry to Wet as you feel the mix.

24-Bit Digital Sound Quality

Play your best with the best! With amazing sound quality thanks to its 24-bit circuitry, the sound is pristine. Your digital song collection never sounded so good, whether you’re using Serato DJ Pro or other preferred software. This is also a great mixer to play vinyl records, with a full EQ and a dedicated low/high pass filter.

Innofader Crossfader

Our butter-smooth Innofader crossfader is designed with the turntablist in mind to perform most intricate and accurate scratches. You have two switches above the crossfader; 1.) reverse the channels and the other 2.) change the slope for a hard cut or a soft curve for mixing.

DVS Ready

Easily connect to the Numark Scratch, whether you use traditional turntables or media players. Scratch unlocks Serato DVS for Serato DJ Pro instantly.

Instant Loop Encoder

Looping made easy. Keep the beat going by pressing the encoder down, and it will lop to the default parameters set in your software. Turn the knob to the right to extend the beat and to the left to shorten the loop.

Connectivity

Scratch has all the necessities with premium features for any setup. There is an XLR main output and unbalanced booth output for the best booth/dance floor experience. There are unbalanced inputs for both line and phono inputs for each channel. A microphone/auxiliary input for XLR or ¼-inch TS controlled by the mic level knob on the mixer gives you all the versatility you could ask for.

Vlerësime

Nuk ka ende vlerësime për këtë artikull.

Vlerësim mund të bëjnë vetëm klientët e regjistruar që e kanë blerë këtë artikull.

Specifikime

Feature Description
Master Outputs (Balanced XLR)
Frequency Response 20Hz – 20kHz (+0.2dB)
Signal-to-Noise Ratio 108dB (A-weighted, max output)
THD+N 0.007 (1kHz, -1dBFS)
Maximum Output Level +20dBu
Output Impedance 300Ω
Master and Booth Outputs (RCA)
Frequency Response 20Hz – 20kHz (+0.2dB)
Signal-to-Noise Ratio 107dB (A-weighted, max output)
THD+N 0.005 (1kHz, -1dBFS)
Maximum Output Level +6dBV (2Vrms)
Output Impedance 300Ω
Headphone Outputs (¼” and 1⁄8” TRS)
Frequency Response 20Hz – 20kHz (+0.2dB)
Signal-to-Noise Ratio 108dB (A-weighted, max output, unloaded)
THD+N 0.005 (1kHz, 10mW per channel into 32Ω)
Maximum Output Level +14dBu (unloaded)
Power Output 115mW RMS (per channel into 32Ω)
Output Impedance 32Ω
Line Inputs (RCA)
Frequency Response 20Hz – 20kHz (+0.3dB)
Signal-to-Noise Ratio 102dB (A-weighted, max input level)
THD+N 0.008 (1kHz, +6.8dBV, -1dBFS)
Max Input Level +7.8dBV (2.45Vrms)
Input Impedance 47kΩ
Phono Inputs (RCA)
Frequency Response RIAA Curve
Signal-to-Noise Ratio 99dB (A-weighted, max input level)
THD+N 0.01 (1kHz, -3dB input)
Other Specifications
USB USB 2.0 High-Speed
ADC / DAC 24-bit, 48kHz
DSP 32-bit fixed point
Drivers PC: ASIO and Windows Audio / Mac: UAC2 Class Compliant (no additional driver needed)
Power Input Typical: 120VAC / 240VAC / 50Hz / 60Hz Auto-Switching