This medium-sized Tier 2 in-ceiling loudspeaker is designed to deliver pristine, engaging acoustics where high-performance sound is a key requirement. It is a two-way model featuring an RST II mid-bass driver and C-CAM tweeter. The performance benefit of having both within a single design means greatly improved clarity, wider dispersion into the listening environment, and clear lifelike high-fidelity sound – of the quality you’d expect from any Monitor Audio passive box loudspeaker.

As a Controlled Performance (CP) model, it is fitted with a fully-sealed back box that provides an ideal air load for the drivers, optimising mid-range and bass performance while maintaining sonic consistency regardless of interior wall construction. These rigid, mineral filled enclosures reduce the sound from the back of the cabinet by around 30 dB. This range guarantees excellent audio quality and versatility, and offers superior sound isolation between rooms and floors.

It has a cut-out dimension of 212 mm and uses the patented Quik-Link speaker cable connecter, which revolutionises the ease and speed of speaker installation. Tri-Grip has also been evolved for simple, reliable and strong fitment.

Optional square or premium grille can be used with this model.

Vlerësime

Nuk ka ende vlerësime për këtë artikull.

Vlerësim mund të bëjnë vetëm klientët e regjistruar që e kanë blerë këtë artikull.

Specifikime

System Format

2–Way

Channels

1

Frequency Response, Installed (-6dB)

70 Hz – 35 kHz​

Nominal Impedance

8 ohm

Minimum Impedance (20Hz to 20kHz)

6.4 Ohm @ 15 kHz

Sensitivity (2.83Vrms@1m, Installed)

87 dB

Maximum Peak SPL* (single speaker @ 1m Z-Weighted)

116 dB

Continuous Power Handling (RMS into Nominal Impedance, Pink Noise with 6dB Crest Factor)

65 W

Recommended Amplifier Power (RMS into 8 OHM, Music Signal)

35 – 130 W

Drive Unit Complement

1 x 7″ (178 mm) RST II mid-bass driver
1 x 1″ (25 mm) C-CAM tweeter

Crossover Frequency

LF/HF: 2.5 kHz

Bass Alignment

Sealed

Mounting Depth

177.5 mm (663/64“)

Cut-Out Hole Diameter

212 mm (83/8“)

External Dimensions (Including Grille (H x W x D))

242 x 242 x 181.5​ mm (91/2 x 91/2 x 44/16”)

Weight (each)

2.6 kg (5 lb 11 oz)

Pre-Construction Bracket

CM-B

Cabinet Finish

Matt black & Orange​ & Bronze

Sold As

Single Unit

Corner Switch

On/Off

HF Switch

– /0/ +